Product ID:MLC ULTRASTAR GLOSS, C 599 18
MSDS Date:06/01/1992
FSC:8010
NIIN:00N034204
MSDS Number: BPXKP

PRATT AND LAMBERT

75 TONAWANDA ST
BUFFALO, NY 14240
US

Emergency Phone: 716-873-6000;800-255-3924

Info Phone: 716-873-6000

Cage: 61196

PRATT AND LAMBERT INC

CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

NAPHTHA, LIGHT AROMATIC; (PETROLEUM HYDROCARBON)

CAS: 64742-95-6

Fraction By Weight: 5%

ACGIH TLV: 50 PPM (MFR)

2-PROPANOL, 1-METHOXY-; (PROPYLENE GLYCOL MONOMETHYL

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 5%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

1 @ 20C

CAS: 34590-94-8

RTECS: JM1575000

Fraction By Weight: <5%

OSHA PEL 100PPM;150STEL, S

ACGIH TLV: 100PPM;150 STEL

3.52 LG/GAL

RTECS: 9999999VO

INDUSTRIAL VENTILATION A MANUAL FOR RECOMMENDED

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY CAUSE NOSE OR THROAT
IRRITATION. HIGH CONCENTRATION MAY CAUSE ACUTE CNS DEPRESSION
CHARACTERIZED BY HEADACHES, DIZZINESS, NAUSEA AND CONFUSION. EYE:
MAY CAUSE EYE IRRITATION. SKIN: MAY CAUS E DEFATTING AND IRRITATION
OF THE SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:REPORTS HAVE ASSOCATED PROLONGED AND REPETED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRIAN AND
NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THE CON TENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:DO NOT INDUCE VOMIT. CALL POIS CTRL CNTR, HOSPITAL
EMERGENCY ROOM/MD IMMED. INHAL:REMOVE TO FRESH AIR IMMED. IF BRTHG
HAS STOPPED GIVE ARTF RESP. KEEP WARM & QUIET. GET MED ATTN IMMED.
EYE: FLU SH W/LRG AMTS OF H*2O FOR @ LST 15 MIN,LIFTING LIDS
OCCASNLY. GET MED ATTN. SKIN:REMOVE CONTAM CLTHG WASH AFFECTED AREA
W/SOAP & H*2O. OBTAIN MED ATTN IF IRRIT PERSISTS. NOTE TO MD: ANY
(SUPP DATA)

Flash Point Method:SCC
Flash Point:200F,93C
Extinguishing Media:NFPA CLASS B EXTING (CO*2, ALL PURPOSE DRY
CHEM/ALCOHOL FOAM) DESIGNED TO EXTING FLAMM LIQ FIRES. LRG:POLYMER
FOAM PREF.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIP . H*2OMAY BE INEFTIVE, BUT MAY BE USED TO COOL EXPOSED CNTNRS
TO PVNT PRESSURE BUILD-UP & POSS(SUPP DATA)
Unusual Fire/Explosion Hazard:DURING EMERGENCY CNDTNS, OVEREXPOSURE TO
DECOMP PRODUCTS MAY CAUSE A HLTH HAZARD. SYMPTOMS MAY NOT BE
IMMEDIATELY APPARENT. OBTAIN MEDICAL ATTENTION.

Spill Release Procedures:WEAR RESPIRATORS EYE, HAND, AND BODY
PROTECTION APPROPRIATE FOR SIZE OF THE SPILL AND THE EXPOSURE
ENCOUNTERED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROTECT FROM FREEZING. DO NOT TAKE
INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP AWAY FROM
CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF APPLIED BY SPRAYING, USE AN NIOSH/MSHA
APPROVED APPROPRIATE, PROPERLY FITTED RESPIRATOR TO REMOVE THE
SPRAY MIST. REFER TO OSHA 29 CFR 1910.134.
Ventilation:PROVIDE LOCAL EXHAUST VENT IN SUFFICIENT VOLUME & PATTERN
SO AS TO MAINTAIN EXPOS BELOW NUISANCE DUST LIMITS (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH FACILITY, SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:AUTO-IGNIT/EXPLOSION WHEN EXPOSED TO EXTREME HEAT. IF
H*2O IS USED, FOG NOZZLES ARE PREFERABLE. FIRST AID PROC:TREATMENT
THAT MIGHT BE REQUIRED FOR OVEREXP SHOULD BE DIRECTED AT THE CT RL
OF SYMPS & THE CLINICAL CNDTNS. VENT: & PERMISSIBLE EXPOS LIMITS
WHICH MAY BE LISTED IN INGRED SEC, REFER TO (ING 5)

HCC:N1
Boiling Pt:B.P. Text:>-28F,>-33C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:74

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (>113 F (46C)) AND
SOURCES OF IGNITION.
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
WELDING OR CUTTING, WILL PRODUCE SMOKE CO, AND CO*2.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.